East West Furniture AVC-BLK-LC Avon Dining Chairs – Faux Leather Upholstered Wooden Chairs, Set of 2, Black

Strongly recommended!
Ordered a 36-inch diameter table and two chairs. Shipped in three separate shipments: pedestal, table, two chairs. Arrived one day earlier than expected. All packaging of superior quality which documents the high quality workmanship of the seller. Solid wood! No chips, dents, scratches. All parts (nuts, bolts, washers) safely wrapped. Table took 50 minutes to assemble. Two chairs – 64 minutes. Easy to read/understand instructions. Table is beautiful and chairs match that description. No wobble in chairs/table. I weigh 200 pounds, and I feel confident the comfortable chairs will last for a long time. I am so impressed, I will purchase two more chairs. I strongly recommend these fine, high quality pieces of furniture, and I intend to purchase from this seller once more.

Have held up well
I bought 4 of these chairs 2 years ago. They are comfortable, sturdy and still look great

Broken chair with first use!
The chair leg broke off the first time we sat on it. The screw broke in half so half of it is in the chair. We have emailed the company twice but haven’t gotten a response. Very disappointing!!

Updated Assembly Instructions
We love the chairs… very comfortable and the fact that the back rest and back legs are all one piece. Included instructions are weak, at best. Here’s an easier way:1) Place seat on a table, cushion side down, with edge for front legs at the edge of the table. Install front legs, but finger tighten bolts only. (I put some of the packing materials under the cushion.)2) Cushion side still down, rotate seat 180 degrees. Let the back edge of the cushion overhang the edge of the table ~1-inch. Install back legs, with all bolts finger tight.3) Leaving the chair as is on the table (upside down with legs up and back of chair hanging down), place a straight-edge (12-inch paint stick or ruler) diagonally across the wooden frame of the cushion to check that the back edges are flush. Slowly tighten the two center bolts, frequently checking that the back edges remain flush. Tighten the 4 corner bolts as you re-check edges, then fully tighten all 6 bolts for the back.4) Flip chair over and place on level, hard floor. Wiggle the front legs as you put down pressure on the cushion, so that all feet are touching the floor equally. Hold that pressure (with a weight or someone pushing down) and tighten the 4 bolts 50%. Take pressure off and check that all 4 feet remain touching the floor. If so, fully tighten all bolts. If not, loosen bolts, wiggle the front legs again, then repeat pressure and bolt tightening.Presto!