-21%
Back to products
CozyLux Queen Comforter Set - 7 Pieces Bed in a Bag Beige Comforters Queen Size Bed Set, Soft Bedding Set with All Seasons Comforter, Sheets, Pillowcases & Shams
Original price was: $39.99.$32.98Current price is: $32.98.
DEVAISE 5-Drawer Wood Dresser Chest with Door, Mobile Storage Cabinet, Printer Stand for Home Office
Original price was: $139.99.$109.99Current price is: $109.99.
Margaret Noble –
Good quality for a low price
This is a nice little cabinet, and very good quality for the price. It took me about three hours to build it (I’m handy, but not a pro, so was very careful). You have to assemble everything, front, back, walls, top, bottom, drawers, sliders, wheels, door, everything. But the instructions, though lengthy, were easy to follow, with inset illustrations to show important details. The hardware is good quality, and they also give you 4 extra of every piece of hardware, just in case you drop a screw and can’t find it. They provide a small Phillips head screwdriver with the set, but I’d recommend having a real screwdriver on hand to do the job. (I have one with a ratchet feature, which makes the whole process faster and easier.) The end result is a solid and attractive cabinet, drawers slide easily, holds a lot, and I’m very pleased.
CB –
A nice flatpack printer cart.
Okay first it showed up in a soggy box. Wet from rain and apparently drug through a puddle on its side, I imagined it was doomed.Upon opening the box Inwas pleased to see the entire thing is surrounded by EPS foam. It protected the particle board aka glued up sawdust from absorbing moisture.I layed everything out and compared to instructions/parts list. Do this BEFORE getting into assembly with anything.All parts present plus a couple of spare bits of hardware.Use a screw driver! Not your lithium brushless nut driver set to “lugnut”… So many people complain of stripped screws and these just take a bit of snugging up, if you hear wood cracking, shredding paper or crunching, it is too tight ;)I assembled using wood glue, a couple of drops in every peg hole, and in the screw in post holes. Having a little squish out as you push parts together is ideal and will give the joints rigidity. Wipe off excess glue from corners on the visible “faces” of the furniture using a slighty damp paper towel.People mentioned having all kinds of problems putting these together… like drawer bottoms being too short, or trying to put them in AFTER putting the front and back of the drawer together. You have to put the face, and two sides on, then slot the drawer bottom in, making sure it is longways, (it is literally 1/8″ longer in one direction and it matters) then put on the back to trap it in place.Drawer holes line up fine if you have your piece right side up. Some people mention having to redrill drawer holes… Every piece in this kit is directional except for the pegs. The top and bottom look identical on one side, but one piece has extra holes on the outside, where wheels mount…Bottom drawer sticking? I found I had to give all of the track screws another quarter turn or so on those bottom rails. It is important to make sure the rail is flush against the wood otherwise the wheels on the drawer will hit the screws like speed bumps.Why bottom only? Probably because this is the only drawer rails you put in while the thing is assembled making it harder to get screws in straight and as tight.It is together, sturdy, sitting under a rather beefy 65lb laser printer.If I had to moan about anything, it would be the wheels. They do not inspire confidence at all. Light, thin plastic wheels mounted by a metal plate about as thick and strong as the lid of a soup can. These will not survive rolling over a threshold. But once in place do allow for some movement of the stand to deal with paper jams and whatnot.I feel the overall quality was worth the price. Better than a lot of the Ikea stuff I’ve had in the past. But don’t expect heirloom quality furniture here 😉
helen strauss –
71 year old, out of shape did it- you can too!!! Beautiful storage
I’m renovvating my ArtRoom & I love these. So well made, lots of parts were a tiny bit daunting… but once I got the hang of it was easy to put together. Only one part stumped me- (why it only got 4 stars) The little plastic “door stops”- illustration was useless and “E” screws don’t go in very far- so I opted not to use them. Hey- I am 71, not in shape woman- yet was able to get them together myself- I placed a floor covering down to work on. NOTE: Box is heavy when delivered… I couldn’t pick it up- But, could push it across my vinyl floor to my back room. and was able to mangage it. Whew!Since I wanted to use the top of my organizers for a work space/desk I opted to raise them up using “Hairpin” Legs I also found on Amazon. I had purchased a second hand “buffet” type storage cabinet and it had them- so everything is elevated design-wise and height. I’m so proud of my hard work.
Amazon Customer –
Excellent cabinet
Very sturdy. Nice appearance. Does take some time to assemble. Follow exact order of assembly directions.
Robert Gillam –
Sturdy 5 drawer storage unit for home office space
This ficd drawer storage cabinet is perfect for my home office. I needed something small with drawers to help unclutter my space a bit, and this worked great!My 10 year old son and I built it together and had it done in about an hour. (This is not our first furniture build).The instructions were good and easy to follow.The drawers slide very smoothly and hold everything I need quite well.It’s not very tall (24″) so be aware of that. I knew that going in, and did the space it’s in, it works great.A tip on installing the door hinges: attach them to the door first, then the unit on its side, rather than up and down. That will let you lay the door on its “front” which let’s the hinges sit in the opening on the side of the unit, which makes screwing them in a whole lot easier.Also, on the pieces that are the bottom of the drawers, be careful to watch how you slide those in. There is a specific way to put them in and if you put it in upside down, you will have to disassemble the drawer a bit to fix it. After we figured that out, it was fine.All in all, it’s sturdy, first well in my space, and was easy to assemble.
Pam B –
Great desk!
Absolutely love this desk. Very sturdy. Nice compartments. Drawers slide in and out nicely. Soft close door on cabinet. Was easy to assemble. Does not chip. The size is perfect for my kitchen “Office”.
RAJ –
La cajonera cumplió con las expectativas.
Helene Belleau –
trop chère pour rien et très petit. vraiment trop chère et très petit. un vrai vole. j’aurais du le retourner mais suffit qu ‘il était monté à moitié je l’ai pas fait
Es algo pequeño, el Instructivo no se entiende –
Pensé que lo enviaban armado, es muy complicado de ensamblar y compré un segundo , estoy pensando cancelarlo