Woodworking Edge Trimmer, Hand Planer Edge Bander for Burrs,Edge Corner Planer,Wood Chamfering Fillet Scraper,Edge Banding Cutter for PVC ABS Melamine Veneer,Deburring Tool,MG-022BK
$4.98
$4.98
Lisa Acchiardo –
Worked very well for me.
This made trimming my edge trim so much faster and cleaner. Nice little tool.
Bigskidude –
Works great
It worked great. You just slide it along and the sharp blade trims it right at the edge.
Gray Svcs –
Inconsistent Cutting; Blade May Need Sharpening
When it arrived, the blade wasn’t sharp enough out-of-the-box. Rather than a nicely trimmed edge, it was tearing and splintering wood quite badly. I polished the blade a bit and got it to a razor’s edge, performed reasonably well for a while. It does have a tendency to throw off lots of tiny splinters for some reason…I may be an outlier here, but I will return to using a wood chisel or an 18mm blade to trim edge banding. Or, as the case may be, a flush-cutting router bit. I can see how this would be a time-saver if it performed better, but the time I lost in repairing the little blemishes isn’t worth it to me.
Ricardo Tillard –
Melamina
Bueno para trabajos con melamina
Anonymous –
Straightforward Tool, Good Results but Less Than Perfect
This tool was very easy to use and is overall a decent value if you have a lot of edge banding to trim. However, I returned mine as I found the results I was able to achieve with just a simple razor blade to be superior, even though it was less ergonomical than the experience offered when using this tool
Amazon Customer –
Worth it
Made the job easier. Cut the vinyl edging very smoothly and really left nothing to sand. Real wood edging wasn’t as smooth but still better than fussing with razor blade.
Dr D –
Didn’t work.
When opening the package, it appeared used and had finger prints all over it.The tool worked on one side but not the other. It actually alligators the edging and I have to remove it and start over… twice after giving the benefit of the doubt. 100% doubt now.Query: if you buy this, and it is indeed new, how will you sharpen the blade when it gets dull?Don’t recommend.
Dane –
Did a good job
For a small project like I had this tool worked great. I can’t say how long the blade will last because I didn’t use it much, under 20′ of banding. Do a test to get the feel of it and it is a good buy.
Tiberius13 –
This worked incredibly well. I thought I would have to use my router with a trim bit… but once I had the technique down, this did the job quickly and efficiently. A little sanding of the edge after just to ensure a nice clean consistent finish and the shelves were done.
Kevin M. –
This item is fantastic, I can quickly deburr 90-95% of most rough edges. I have used it almost daily and would be lost with out it.I only hope that there is one for rounded edges like a circle or for other curved edges.
Olaf –
Only have used it for 1 project. Worked just as advertised. It has 4 blade sides to use, so if 1 gets dull just flip it around
Cameron –
It worked well AFTER I removed the burrs from the cutting edge.
A Customer –
Very nice for trimming veneer. It took me a couple try to get it perfect since I had never used this before but once I did it trimmed the veneer very nicely.